Home | FAQ's
 
 
Home > Our Products



AFG ECR Multi Purpose Direct Roving for Filament Winding/ Pultrusion/ Knitting/ Weaving
 
 
Product Information | Technical Parameters | Packaging | Storage Conditions
 
Product Descriptions
 
AFG ECR Multi Purpose Direct Roving is manufactured by direct winding of silane sized continuous ECR glass bers of dened diameter into a cylindrical roving package.

AFG ECR Multi Purpose Direct Rovings are compatible with polyester, vinyl ester, phenolic and epoxy resins and are designed for use in filament winding, pultrusion knitting and weaving.

AFG's ECR glass fiber reinforcements combine the electrical and mechanical properties of traditional E glass fiber with superior chemical corrosion resistance, superior thermal resistance, higher di-electric strength and better surface resistivity.

 
 
Product Information
 
 
Product Glass Type Product Code Linear Density Filament Diameter Sizing
      (tex) (µm)  
Direct Roving
ECR SRMP30014

SRMP60014

SRMP120017

SRMP240017

SRMP240024

SRMP480024

SRMP960034
300

600

1200

2400

2400

4800

9600
14

14

17

17

24

24

34
silane
 
 
 
Technical Parameters
 
 
Linear Density (%)ISO 1889 ± 10
Moisture  Content (%)ISO 33440.2 max
Combustible Content (%) ISO 1887

0.55 ±  0.2

Net Weight (kg)  16
 
 
 
Packaging

AFG Multi Purpose ECR Direct Roving are continuous glass strands formed into a cylindrical package.
The packages are wrapped in plastic film for protection and to facilitate do-to-do transfer, packed on a pallet in a card board carton box.
Pallets contain three or four layers. Each layer contains 16 packages.

 
Approx Package Weight Package Size Packages per layer Packages per pallet Pallet size Pallet net weight approx
External Diameter Internal Diameter Height
(kg) (mm) (mm) (mm) (kg)
16 280±5 170±5 260±10 16 48 1140x1140x880 768
64 1140x1140x1180 1024
 
 
Storage Conditions
 
The product should be stored in its original packing material in a dry area. Temperature should not exceed 35°C and the relative humidity should be kept below 65%. It is recommended that the product is stored at room temperature at least 24 hours before use to avoid moisture condensation.
Pallets should not be stacked more than two layers high.
 
 
The above information reflects typical values of AFG’s products, based on our laboratory data. However, we do not
guarantee its applicability to the user process or assume any liability or responsibility arising out of its use or
performance. AFG reserves the right to change the above data and specifications without prior notice.
 
 
Click Here  SUIS EU Click Here  MSD Sheets USA Click Here  DATA Sheets