Home | FAQ's
 
 
Home > Our Products



AFG ECR Multi-End Roving for Chopping
 
 
Product Information | Technical Parameters | Packaging | Storage Conditions
 
Product Descriptions
 

AFG ECR Multi-End Roving is a multi-end continuous roving, with a silane sizing, gathered into a single strand and wrapped into a cylindrical package without twist.

AFG ECR Multi-End Rovings are compatible with polyester resins and are designed for use in chopping applications, such as lament winding and centrifugal casting.

AFG's ECR glass ber reinforcements combine the electrical and mechanical properties of traditional E glass ber with superior chemical corrosion resistance, superior thermal resistance, higher di-electric strength and better surface resistivity.

 
 
Product Information
 

Product Glass Type Product Code
Linear Density Filament Diameter Number of Ends Strand Linear Density Sizing
      (tex) (μm)   (tex)  
Multi-End Roving
ECR

CHOR24001256

2400 12

56

43

silane
 
 
 
Technical Parameters
 

Linear Density (%)ISO 1889 ±10
Moisture  Content (%)ISO 3344 0.2 max
Combustible Content(%) ISO 18871.2% nominal
Net Weight (kg)  20 ± 2kg
 
 
Packaging
 

AFG ECR Multi-End Roving is a multi-end roving gathered into a single strand bundle without twist.
This roving is supplied in a plastic wrap and packed together within a card board carton box including thirteen support posts in a pallet.
Pallets contain three or four layers. Each layer contains 16 packages.
This roving can also be supplied with do-to-do connections.

 

Approx Package Weight Package Size Packages per layer Packages per pallet Pallet size Pallet net weight approx
External Diameter Internal Diameter Height
(kg) (mm) (mm) (mm) (kg)
20 280±5 75±10 260±10 16 48 1140x1140x880 960
64 1140x1140x1180 1280
 
 
 
Storage Conditions
 
The product should be stored in its original packing material in a dry area. Temperature should not exceed 35°c and the relative humidity should be kept below 65%. It is recommended that the product is stored at room temperature at least 24 hours before use to avoid moisture condensation.
Pallets should not be stacked more than two layers high.
 
 
The above information reflects typical values of AFG’s products, based on our laboratory data. However, we do not
guarantee its applicability to the user process or assume any liability or responsibility arising out of its use or
performance. AFG reserves the right to change the above data and specifications without prior notice.
 
 
Click Here  SUIS EUClick Here  MSD Sheets USAClick Here  DATA Sheets