Home | FAQ's
 
 
Home > Our Products



AFG ECR MULTI-END ASSEMBLED ROVING
 
 
Product Information | Technical Parameters | Packaging | Storage Conditions
 
Product Description
 

AFG ECR Assembled Roving is a multi-end continuous roving, with a silane sizing, gathered into a single strand and wrapped into a cylindrical package without twist.

AFG ECR Multi Purpose Assembled Roving are compatible with polyester, vinyl ester, phenolic and epoxy resins.

AFG ECR glass ber reinforcements combine the electrical and mechanical properties of traditional E glass ber with superior chemical corrosion resistance, superior thermal resistance, higher di-electric strength and better surface resistivity.

 
Product Information
 

Product Glass Type Product Code
Linear Density Filament Diameter Number of Ends Input Sizing
      (tex) (μm)      
Multi-end Roving
ECR AS48002402 4800 24 02 SRMP240024 silane
 
 
 
Technical Parameters
 

Linear Density (%)ISO 1889 ±10
Moisture  Content (%) ISO 3343 0.2 max
Combustible Content(%) ISO 1887 0.55 ± 0.2
Net Weight (kg)  21 ± 2
 
 
Packaging
 

AFG ECR Multi-end Assembled Roving are continuous glass strands formed into a cylindrical package.
The packages are wrapped in plastic lm for protection and to facilitate do-to-d transfer, packed on a pallet in a card board carton box.
Pallets contain three or four layers. Each layer contains 16 packages.

 

Approx Package Weight Package Size Packages per layer Packages per pallet Pallet size Pallet net weight approx
External Diameter Internal Diameter Height
(kg) (mm) (mm) (mm) (kg)
21 270 ± 10 76 ± 10 250±10 16 48 1140x1140x880 1008
64 1140x1140x1180 1334
 
 
 
Storage Conditions
 
The product should be stored in its original packing material in a dry area. Temperature should not exceed
35°C and the relative humidity should be kept below 65%. It is recommended that the product is stored at
room temperature at least 24 hours before use to avoid moisture condensation.
Pallets should not be stacked more than two layers high.
 
 
The product should be stored in its original packing material in a dry area. Temperature should not exceed 35°C and the relative humidity should be kept below 65%. It is recommended that the product is stored at room temperature at least 24 hours before use to avoid moisture condensation.
Pallets should not be stacked more than two layers high..
 
 
Click Here  SUIS EUClick Here  MSD Sheets USAClick Here  DATA Sheets