Home | FAQ's
 
 
Home > Our Products



HIGH PERFORMANCE DIRECT ROVING
 
 
Product Information | Technical Parameters | Packaging | Storage Conditions
 
Product Descriptions
 
AFG ECR High Performance Direct Roving (SRHP) is manufactured by direct winding of silane sized continuous ECR glass fibers of defined diameter into a cylindrical roving package.

AFG ECR High Performance Direct Rovings are compatible with polyester, vinyl ester, phenolic and epoxy resins and an alternative for Multi Purpose (SRMP) version. It has been specially designed for use in filament winding, pultrusion, knitting and weaving thereby giving excellent result in mechanical properties.

AFG's ECR glass fiber reinforcements combine the electrical and mechanical properties of traditional E glass fiber with superior chemical corrosion resistance, superior thermal resistance, higher di-electric strength and better surface resistivity.

Product Information
 
 
Product Glass Type Product Code Linear Density Filament Diameter Sizing
      (tex) (µm)  
Direct Roving
ECR SRHP30014
SRHP60014
SRHP120017
SRHP240017
SRHP240024
SRHP480024
SRHP960034
300
600
1200
2400
2400
4800
9600
14
14
17
17
24
24
34
silane
 
 
 
Technical Parameters
 
 
Linear Density (%)
ISO 1889
± 10
Moisture  Content (%)
ISO 3344
0.2 max
Combustible Content (%)
ISO 1887

0.55±0.2

Net Weight (kg)
16
 
 
 
Packaging

AFG ECR High Performance Direct Roving are continuous glass strands formed into a cylindrical package
The packages are wrapped in plastic lm for protection and to facilitate do-to-do transfer, packed on a pallet in a card board carton box.
Pallets contain three or four layers. Each layer contains 16 packages.

 
Approx Package Weight Package Size Packages per layer Packages per pallet Pallet size Pallet net weight approx
External Diameter Internal Diameter Height
(kg) (mm) (mm) (mm) (kg)
16 280±5 170±5 260±10 16 48 1140x1140x880 768
64 1140x1140x1180 1024
 
 
Storage Conditions
 
The product should be stored in its original packing material in a dry area. Temperature should not exceed 35°c and the relative humidity should be kept below 65%. It is recommended that the product is stored at room temperature at least 24 hours before use to avoid moisture condensation. Pallets should not be stacked more than two layers high
 
 
The above information reflects typical values of AFG’s products, based on our laboratory data. However, we do not guarantee its applicability to the user process or assume any liability or responsibility arising out of its use or performance. AFG reserves the right to change the above data and specifications without prior notice.
 
 
Click Here  SUIS EU Click Here  MSD Sheets USA Click Here  DATA Sheets